Monday, December 27, 2010

Enigma 2 RTi core RC1

What is new :

- New Kernel with better stability improvements.

- New Overclock driver for SAFE overclocking of Sigma SMP8634 CPU up to 370 MHz . 

( Overclocking is done On-Fly with step up size of 10 MHz, and this is VERY SAFE Method which allow You to overclock CPU of Your AzBox up to 370 MHz , 

if something goes wrong, on reboot there are routines which will reset CPU to default clock, so nothing can happen ).

- Fixed A/V Settings, VFD and Standby plugins are separated now.

- New Mediaplayer files, so DVD .iso and .ts files are supported now.

- Overall stability and speed of Enigma 2 is better and improved.

Tuesday, December 14, 2010

RTi core 1.0.3 BETA Image based on : Enigma 2 from 04-12-2010



New kernel by the_ripper

What is new ?

- Applied New Audio FIX

- Interlace/Deinterlace FIX

- Fixed 30% CPU BUG ( Better stabillity )

- Better VFD Support

- Volume UP/Down fully fixed

- Fixed System clock

- Better overall stabillity

- A lot of changes on Enigma 2 ( A/V Settings EXPERIMENTAL , Welcome w i z a r d )

- Fixed Multimedia ( MKV, AVI ) now OK

- A lot of other small fixes and changes internally

We hope that next release will be RC1 ( Release candidate 1 ) as Recording and Subtitles are in internal Testing phase.

WE WOULD LIKE TO SAY THANKS TO OPENSAT WHICH WAS INVOLVED TO PUT ALL EFFORTS TO SUPPORT AND COOPERATE ON THIS PROJECT

*** Please use AzUP v1.2.5 by telesat to Flash this new RTi core 1.0.3 BETA version of Enigma 2 in Your receiver including the KERNEL!!! , and read Release notes of AzUP v1.2.5 ***

*** KEEP IN MIND THAT THIS IS FULLY CLEAN CVS IMAGE, AND IT NOT CONTAIN ANY ILLEGAL FILES INSIDE ***

Wednesday, December 01, 2010

RTi core 1.0.2 BETA

What is new :



- Improvements on Audio part ( syncing )

- Card reader driver support ( /dev/sci0 ) EXPERIMENTAL

- Multimedia support ( Seeking OK, Play/Pause and Stop Ok, Audio sync )

- Wifi support for Premium/Premium+

- Time fix on VFD and Enigma 2

- HDMI Hotplug Fixed

- Fixed problem with jumping of 2 spaces on Multimedia player

- Online Software update ( drivers and python components from azbox-enigma.eu server )

- Password problem Fixed ( You can change password now )




WE WOULD LIKE TO SAY THANKS TO OPENSAT WHICH WAS INVOLVED TO PUT ALL EFFORTS TO SUPPORT AND COOPERATE ON THIS PROJECT

*** Please use AzUP v1.2.5 by telesat to Flash this new RTi core 1.0.1 BETA version of Enigma 2 in Your receiver including the KERNEL!!! , and read Release notes of AzUP v1.2 ***

Wednesday, November 24, 2010

RTi core 1.0.1 BETA

What is new :

- Fixed Audio sync ( now all should be ok ).

- Fixed HDMI Hotplug

- Fixed Web Interface

- Fixed Volume UP


More to come :

Work on recording and subtitles, Online software update ( Drivers and System components )

Currently under work :

- Fix for Multimedia

Monday, November 22, 2010

RTi core 1.0.0 BETA

What is new :

- Audio Fix - Fully fixed. by the_ripper

- HDMI Hotplug Fixed by the_ripper

- AzBox VFD Functionallity ( SETUP -> SYSTEM -> AZboxVFD for setup ). by DDamir

- Standby functionality FIXED by DDamir

- Multimedia Player Support ( Support for Various media formats ) by Sattomy

- SubtitlePlayer 3.0.2 ( Exclusivity, as SubtitlePlayer 3.02 is only accessible currently on AzBox HD ) by DDamir

- CrossEPG Plugin Integrated

- WebInterface AzBox HD ( Automatic selection of RCU on Web Interface Elite / Premium RCU ) by DDamir

- USB drivers support for Keyboard and Mouse by joseba


- Channel list by Daconi

WE WOULD LIKE TO SAY THANKS TO OPENSAT WHICH WAS INVOLVED TO PUT ALL EFFORTS TO SUPPORT AND COOPERATE ON THIS PROJECT

*** Please use AzUP v1.2 by telesat to Flash this new RTi core 1.0.0 BETA version of Enigma 2 in Your receiver including the KERNEL!!! , and read Release notes of AzUP v1.2 ***

Tuesday, November 02, 2010

Enigma 2 v1.0.31

Devices suitable for flashing : Elite - Premium - Premium+ - Ultra

What is new :

- Added support for DVB-S2 Tuner in Ultra model

- Volume UP and Down Mute and Un-Mute for all models

- Few more fixes

Download: http://azbox-enigma.eu/upload/E2_AZBox_1.0.31.rar

Monday, November 01, 2010

Enigma 2 v1.0.30



Devices suitable for flashing : Premium+

What is new :

- P+ tuner driver tested

- P+ FAN control enabled and activated

- some fixes in audio - volume control now is ok, mute/unmute also

- plus few more fixes

Download :


http://azbox-enigma.eu/upload/E2_AZBox_1.0.30.rar


EDIT: Alleen voor de Premium Plus

Thursday, October 28, 2010

Enigma 2 v1.0.29


Devices suitable for flashing : Elite and Premium

What is new :

- MyTube plugin (YouTube)

- Multimedia fix for various formats by sattomy

ATTENTION: Use AzUP v1.1 for Flashing this version of Enigma 2 into Your devices !!!

http://www.azbox-enigma.eu/?p=81

Tuesday, October 26, 2010

Enigma 2 v1.0.28

Devices suitable for flashing : Elite and Premium
What is new :
- Fix for no signal on DVB-S2 tuner for some users
- Multimedia fix for various formats by sattomy


http://www.azbox-enigma.eu/?p=71

Monday, October 25, 2010

Enigma 2 v1.0.27

Devices suitable for flashing : Elite and Premium

What is new :
- DiseQc FIX ( 1.0 , 1.1 , 1.2 Manual and USALS too )
- DVB-S2 FIX
- Integrated BlackShadow2 skin by Matrix10
- Fixed boot error

ATTENTION: Use AzUP v1.1 for Flashing this version of Enigma 2 into Your devices !!!



Download : http://www.azbox-enigma.eu/?p=63

Sunday, October 24, 2010

Enigma v1.0.26 by the_ripper and team


What is new :

DiseQc FIX ( 1.0 , 1.1 , 1.2 manual and USALS )

DVB-S2 FIX

Added /boot partition so no more errors durring installation of IPKG

Integrated BlackShadow2 Skin from Matrix10 ( thanks to Matrix10 ).

Download : http://www.azbox-enigma.eu/upload/E2_AZBox_1.0.26.rar

Gebruik voor installeren AzUP v1.1 by telesat!

Download : http://www.satpimps.com/showpost.php?p=760926&postcount=1588

Sunday, June 20, 2010

9.9.4931 - telesat® - mod & AZBox4YU


9.9.4931 - telesat® - mod & AZBox4YU



This image is a modifictaion of original 0.9.4931 and it is, in a first
place, for dummies.

The idea is that dummy, which is usng AZBox for a first time, can get
basics for normal use of it,

without any knowledge of linux/stb.



Installing this FW you are getting:

- new skin, which is, by my opinion, more elegant from the original one;

- ch list for the most watched satellites for usals DiseqC motor

- plugins: liveonsat, livefeeds, tevee4yu, WeatherForecast, SudoQ,
tuxchess_0.2, colorbars, PassReset

- CAMs and camreader: Mbox, MGCamd, MultiCAS, CheopsCAS and NewCS
(CardReader)

by default Mbox and Newcs are active, cofigured to work together,

which means that the only thing that you should do is to put your
original card in the slot and the image will appear

You can choose CAMs by pushing '****|' button

You can get ECM info if you push '****' button

- font 'telesat_Uni4AZ.ttf' - subtitles have better visibility (space is
ok)

- Network is set on automatic assigning of network parameters - DHCP

After your first restart, on VFD you will get IP address, which is
assigned to AZBox

- Network services activated: SSH, Telnet, FTP

- SAMBA activated and set right

- Settings for downloading plugins and CAMs - reset



After you install FW and your first restart, you'll get setup menu.

Choose 'TV channel', then 'Tuner A.DVB-S' and 'Antenna Setup', go down
to 'Positioner Setup - USALS', press OK and enter your USALS parameters.

After you go out from the menu, remove your USB stick, reboot your AZBox
pressing POWER button down for 5 seconds.

Your AZBox is now ready to be used.



Gratitude goes out to the AZBox4YU team:

Chemstar - for the preinstalled plugins

iPod - for the idea

Roger Rabbit - moral support

Mickey - testing

Thief - proof-reading

telesat - the one responsible for the existance of this FW



ATTENTION :

IF update with new FW is succesful - you will get SETUP menu, in other
case - pls renew update !

Sunday, February 21, 2010

New KGD 0.4348


We rushed a bit but finally launch, we have here the new image based on the official 4348, we would have liked to try but we failed due to time so if there is any failure to forgive.
Looking at the requests of the users have tried to get a new firmware to comply with them that are primarily the EPG and multimedia mainly reproductions mkv.
New:
This image brings the main novelty Epg 5 days for Astra and Hispasat Spanish provider

The second new is the sigma TakeControl KGD to 8634 after many tests we have seen that the main problem in multimedia playback azbox is the mismanagement of the resources it contains, because similar equipment, popcorn, wdhd, etc ... having a perfect reproduction in the same chipset sigma 86xx, the difference is that our azbox have built and linked to other aspects that significantly reduce the resources, we managed to optimize takecontrol much better.
Tests with the TC have achieved a perfect reproduction in from internal or external HDD, mainly with high bibrate mkv getting almost the same results as a NMT533 of popcorn.
From PanelKGD you have the following options:
1) General yield figure is activated soon after starting the TKC.
2) Yield TV is activated soon after starting the TKC.
3) Media Optimization is activated when the media starts
4) Optimization rss activates when you start the rss
5) Optimization youtube activates when you start the youtube.
Options 3, 4 and 5 can be used to maximum and is recommended. But in the 1 and 2 is convenient to put a very low minimum value, if the opening of channel emulation is correct and these options should not be touched . You will be able to make several tests but a very high value in options 1 and 2 can cause the system to slow down or problems.
IMPORTANT you can make several changes to the TakeControl and the effects are immediate but if you turn off or restart the computer this configuration is forfeited, so that it will have to keep going to the Settings menu and activate the TCK will be maintained as well when you reboot your configuration.
The takecontrol always know when is activated or deactivated because it showed the display.
Other developments PanelKGD:
The version 1.1 brings separate PanelKGD of takecontrolkgd another popular option for people because of problems with USB devices and HDD and their ext2, ex**, fat, etc. .. You can now format for any device in the format of choice in HDD Extras panel, there is also the possibility of converting a HDD USB or pass this on ext2 to ex** without losing data (not guarantee) the tests were satisfactory but may someone does not go well. And last on this same menu you will have the option of formatting the DOM instead of the next Upgrade to recommend changes before putting the image to this format EYE lost all data and should only be done for a makeover However before doing this format will make a backup of PanelKGD, ddirec, telnet, etc. .. and very important part of your folder so only Openxcas would have to put your data network and download the channel list.
In the channel list we made some changes now can download the channel list of the FTP server and no need to restart, the only thing to do is just have stuck antenna configure your data.
Also we have changed the panel and its webinterface DDirec now in version 2 we have corrected the problems starting from the first version, in webinterface have to

Code:Prioridad="0"

Where there are 4 options available, "0" is off, "alta" is "high", "media" is "medium" and "baja" is "low" you will have to write it as such in lowercase, in future versions we will put it on the panel to configure it from there.

General changes:
Other changes are when you install an internal HDD without the default image format on startup will do it in ext2 and ex** not to now.
There have been more changes in the skin and tucked the new translations for spanish of Ajo.
We have improved some aspects of the boot.
And last and most important thank all who have collaborated and developed the image, mainly Morser which has been the developer of the EPG, the admin of azboxhd.es, Milix, Linarense, Fundidum, Yersi, Mpiero, Macmanolo and I will not forget anyone mas. We also want to thank the web provides the EPG (http://www.rytec.be/)

http://www.multiupload.com/B5UABUPC03